New to the board
Arm chair racerNew to the board
This is a freshly serviced shock, I swapped the stock swingarm for an LSR 18.5" (1" shorter). Dog bone is 6.75" ctc and wishbone linkage to frame is 7". What you're hearing in the vid is what sounds to me like the shock bottoming out on rebound...there is some sag and if you pull up through the sag it makes the same noise. Anyone have any ideas??? Thanks In advance!
https://m.youtube.com/watch?v=qrRghdXEfIw
Last edited by Usmoneylover; 07-22-2016 at 09:10 PM.
At The Back Of The Pack
Arm chair racerAt the back of the pack
I can't seem to watch the video. Can you post a different link?
1984 Honda Big Red ATC 200ES (Emma)
1985 Honda 200X ATC (Pretty Boy)
1985 Honda 250R ATC (Dr. Fast)
1985 Honda 250R ATC ( 77 )
1985 Honda 250R ATC (Baller)
1986 Honda 350X ATC (Go Go Girl)
Feed Back: http://www.3wheelerworld.com/showthr...k-for-arlaunch
New to the board
Arm chair racerNew to the board
New to the board
Arm chair racerNew to the board
Hopefully one of the links work now!
Got The Holeshot
Arm chair racerJust too addicted
Stock linkage? Have you disconnected the shock and run the swing arm through its full motion of movement to see if anything else is making contact?
1985 250r-LED Performance 4mm Stroker motor
1978 ATC70 w/ Piranha 140cc
1972 - K1 - CT70 w/lifan 125cc
2017 YZ 250x- Braap
Youtube channel = http://www.youtube.com/user/ter5678/videos
Power User
Catch me if you can
Doesn't appear to have any rebound damping at all??
I agree with taking the shock off and seeing what is hitting...
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
The day begins with 3WW
Did you set the spring preload properly?
Sent from my iPhone using Tapatalk
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
New to the board
Arm chair racerNew to the board
I havent removed the shock to test the motion, all the bushings etc sre tight though. I did notice my shock guy had the preload wound down a pretty good bit. I made some adjustments which seemed to help some. With a shorter swingarm the spring should be closer to correct for my 210 lbs I would think?
Got The Holeshot
Arm chair racerJust too addicted
Dirtcrasher has a good point that I didn't pay attention too. The rebound dampening looks non existent! Does it change when you adjust the clicker??
1985 250r-LED Performance 4mm Stroker motor
1978 ATC70 w/ Piranha 140cc
1972 - K1 - CT70 w/lifan 125cc
2017 YZ 250x- Braap
Youtube channel = http://www.youtube.com/user/ter5678/videos
Trikein' Away
Lord of the trike
That shock is built wrong.
Power User
Teaching quads a lesson
get that shock built correctly, it seams like a pogo stick and that may be the sound that you are hearing from it "snapping back", it may be coming from the spring.
New to the board
Arm chair racerNew to the board
Anyone recommend a shock builder who can fix my shock?
Trikein' Away
Lord of the trike
Originally Posted by Usmoneylover
New to the board
Arm chair racerNew to the board
I need to know right meow, thanks!
At The Back Of The Pack
Arm chair racerFirst time rider
Milner!!!!!!!!!
Reply With Quote