84/85 atc125m exhaust options?

[37doc]

Hello , new to this forum, just picked up an 1985 atc125m and want to put an exhaust on it. It seems the DG and Cobra exhausts, are gone for the 125m can someone help me source a leftover? or does anyone know if the same year 110 exhauist will fit and work without any problems? Thanks for all the help in advance!

[shortline10]

I might have a DG in storage . Let me check for ya . The atc110 exhaust are different . the angle at which they come out of the head and the mounts are different at the head also .

[37doc]

I might have a DG in storage . Let me check for ya . The atc110 exhaust are different . the angle at which they come out of the head and the mounts are different at the head also .

LOL, "in storage" I know exactly what you mean, I have so many projects right now its pretty ridiculous... 73 st90, 2 75 rd350's, 75 Yami Champ 80...... Let me know what you find, Im checking with a cornucopia of dealers today.....Thanks for any help. Aaron.

[37doc]

I also found th p/n for the 85/85 trx125 exhaust from dg is the same , but also hard to find....

[JohnR.]

The atc110 exhaust are different . the angle at which they come out of the head and the mounts are different at the head also .

Do you think with a little heat the 110 pipe could be tweaked to fit? The brackets would be pretty easy to weld on if that's the case.

John

[shortline10]

Do you think with a little heat the 110 pipe could be tweaked to fit? The brackets would be pretty easy to weld on if that's the case.

John

The 125m has a smaller mounting flange than a 110 so it might not seal up correctly but with some riggin it might work .

[JohnR.]

Oh well. The stock exhaust on mine is OK but not great. Thanks for the info.

[37doc]

Bump......

[shortline10]

I found it . Its a brand new DG but some idiot cut the pipe to get the head flange off for something else . You can use your stock exhaust flange and weld the pipe back and it will be perfect again . 30.00 plus 10.00 shipping . LMK if you want a pic . Mike

[37doc]

I found it . Its a brand new DG but some idiot cut the pipe to get the head flange off for something else . You can use your stock exhaust flange and weld the pipe back and it will be perfect again . 30.00 plus 10.00 shipping . LMK if you want a pic . Mike

sure send a pic to 37doc at excite dot com. thanks , for the effort. Aaron.

[shortline10]

Here is a pic of the DG pipe for a atc125m 84/85 model . New pipe never installed its just missing the mount flange and was cut but could easly be welded or slip a piece of pipe over it and rivit it like in the pic . stock exhaust flange will fit and work fine .

[37doc]

why in gods name would they cut it like that? let me see if any of these places ive found happens to have one intact. Although I'm thinking my odds are not good....

[JohnR.]

If 37doc doesn't want it I'd probably be interested.

[shortline10]

If 37doc doesn't want it I'd probably be interested.

JohnR your 2nd in line if 37doc doesnt want it . Its a very nice pipe and wouldnt take much to fix it .

[37doc]

john can have dibs, Im gonna keep searching for something intact! thanks for the help!