Mickey had some fiberglass fenders made in the past couple of weeks and I wanted to know how many folks would like to have some made from my meyer low profile fenders as a mold.
Got The Holeshot
Arm chair racerJust too addicted
Mickey had some fiberglass fenders made in the past couple of weeks and I wanted to know how many folks would like to have some made from my meyer low profile fenders as a mold.
Just Too Addicted
Arm chair racerJust too addicted
I'd sure would like a set of low profile fenders
Got The Holeshot
Arm chair racerJust too addicted
I would take a set of them.
Dirty Main jets are my bane.
4 Wheels? Huh?
Make sure you look into the shipping of these before you get too involved, the R fender doesn't fit well in a box. Also with my past experience with group buys you need to have a price set with shipping included for people to commit. Then you will still have people disappear when it comes time to pay for them
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
Just Too Addicted
Arm chair racerJust too addicted
As long as it is a good price and shipping is good as well, keep us informed
Power User
The day begins with 3WW
Being that I'm a impulse buyer, I would have jumped on at any price a few months ago. Now that I'm fed up with spending money on three wheelers, and three wheelers in general, I need to know price before I commit.
Last edited by bkm; 10-29-2013 at 12:17 PM.
'86 ATC 250R, Build Thread http://www.3wheelerworld.com/showthr...highlight=250r
'86 "Factory Tri racing" Tri-Z http://www.3wheelerworld.com/showthr...b-Top-Tank-ect
Pile of Tecate Parts
My Feedback Thread: http://www.3wheelerworld.com/showthr...edback-for-bkm
Got The Holeshot
Arm chair racerJust too addicted
THis is some good feedback for the fenders. I know half the folks on here have a water pumper and if just 5% of those people had them
looking like racers then there ought to be 20 or 30 people would be interested. I will get a pic posted of the fenders that I want to replicate
so you can see what they will look like, except shinier and more durable and also new not 30 years old
Dirty Main jets are my bane.
4 Wheels? Huh?
What kinda fenders are yours keith I have a set of maiers also. Are yours the fiberglass ones or plastic?
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
Power User
Got the holeshot
*******************
Last edited by Mickey Dunlap; 02-05-2014 at 07:26 AM.
Got The Holeshot
Arm chair racerJust too addicted
Mine are plastic, but I wanted to replicate them in fiberglass. Same company Mickey used on the 200X fenders earlier this month.
Just Too Addicted
Arm chair racerJust too addicted
if you will be using fiberglass I am definitely out!!!!!!!!
Got The Holeshot
Arm chair racerJust too addicted
Doesnt matter to me whether it is fiberglass or plastic. Just need a perfect set of low pros.
At The Back Of The Pack
Arm chair racerAt the back of the pack
you have to be real careful about what box you use to ship fenders you go oversize and the price almost doubles. It can be done pretty cheap but you need just the right box .
Got The Holeshot
Arm chair racerJust too addicted
I got a new set from Maier a couple of years ago and they came in a big box. Shipping was outrageous. I think you want to keep it under 70 inches.
At The Back Of The Pack
Arm chair racerAt the back of the pack
I want a set
Reply With Quote