yeah my guess also
First Time Rider
Arm chair racerNew to the board
yeah my guess also
At The Back Of The Pack
Arm chair racerFirst time rider
you may parts inside it going bad.. open it up and check it out.
3wheelers I own now: 86-ATC500R 86-KXT500 87-KXT250
Check out my 3wheeler videos on youTube Lazybiker79
http://www.youtube.com/watch?v=UNy9k...qljTifaAX47-6w
I'm your dingleberry
The day begins with 3WW
But it's not a huge difference, and if you ride in any kind of wet conditions at all it's not worth the trouble. Engines don't like their fuel/air mix with a shot of water.... Great for dunes and dry condtitions though!
What I have done is kind of a blend of both approaches.... I removed the snorkel pipe that connects the airbox to the main frame backbone. While it does pose a little more risk of water ingestion, it does open up the airflow alot while providing most of the protection of running the full airbox. Had to jet up 2 sizes when I removed that snorkel pipe.
That might be a better alternative for you if you want better airflow without running a full airbox eliminator setup.
Last edited by RIDE-RED 250r; 09-01-2012 at 08:01 PM.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
First Time Rider
Arm chair racerNew to the board
really? i didnt know that i thought the engine just breathes beter...but it would efect jetting right
First Time Rider
Arm chair racerNew to the board
i oiled it and it was better but still a little hard
At The Back Of The Pack
Arm chair racerFirst time rider
I was a world of difference on mine just taking the air box lid off..Originally Posted by RIDE-RED 250r
But it's not a huge difference, and if you ride in any kind of wet conditions at all it's not worth the trouble. Engines don't like their fuel/air mix with a shot of water.... Great for dunes and dry condtitions though!
3wheelers I own now: 86-ATC500R 86-KXT500 87-KXT250
Check out my 3wheeler videos on youTube Lazybiker79
http://www.youtube.com/watch?v=UNy9k...qljTifaAX47-6w
At The Back Of The Pack
Arm chair racerFirst time rider
check your plug after and go from there.
3wheelers I own now: 86-ATC500R 86-KXT500 87-KXT250
Check out my 3wheeler videos on youTube Lazybiker79
http://www.youtube.com/watch?v=UNy9k...qljTifaAX47-6w
At The Back Of The Pack
Arm chair racerFirst time rider
Did you lube the cable?
3wheelers I own now: 86-ATC500R 86-KXT500 87-KXT250
Check out my 3wheeler videos on youTube Lazybiker79
http://www.youtube.com/watch?v=UNy9k...qljTifaAX47-6w
First Time Rider
Arm chair racerNew to the board
plug chops
At The Back Of The Pack
Arm chair racerFirst time rider
The color of the plug.. it will show the way you need to go with jetting.
3wheelers I own now: 86-ATC500R 86-KXT500 87-KXT250
Check out my 3wheeler videos on youTube Lazybiker79
http://www.youtube.com/watch?v=UNy9k...qljTifaAX47-6w
At The Back Of The Pack
Arm chair racerFirst time rider
NO check youtube..
3wheelers I own now: 86-ATC500R 86-KXT500 87-KXT250
Check out my 3wheeler videos on youTube Lazybiker79
http://www.youtube.com/watch?v=UNy9k...qljTifaAX47-6w
First Time Rider
Arm chair racerNew to the board
yes i did cable is fine
I'm your dingleberry
The day begins with 3WW
Really not hard at all if you are mechanically able.
We are glad to help here at 3WW, but some topics have been covered quite thoroughly and a little time searching certain topics (like fork rebuilding) should net you plenty of results. Give it a try and check back.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
First Time Rider
Arm chair racerNew to the board
yes ride it wo then check it
First Time Rider
Arm chair racerNew to the board
no? what does that mean
Reply With Quote
