Roostin' Away
Arm chair racerRoostin Away
I went to see Nitro Circus last night in Toronto, Ontario. CA. It was a a indoor show where the Maple Leafs play. Great show and a must see. Sorry. No pics at this time as my phone is having that time of the month...
They have come to Hamilton a couple times but never went. Back in 2014 Bruce Cook broke his back in Hamilton. He is from Canada. He was there last night and did a back flip on a modified bike!!!
My GF got us the tickets for my B-DAY.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
'83 200X
Chicks love guys that ride trikes
Power User
Roostin Away
THE..... Ohio State UniversityOriginally Posted by Mach-10
Power User
Roostin Away
All set for the woods. The arch works well on the front for some of the tight trails. Straddle log, lift up so tongs engage and then back down to lift log
Power User
Roostin Away
Everything ready for the 4:30 am departure tomorrow morning for a weekend in Frisco and a 2 day trip back on hwy 1. I could really use a small pull behind trailer for all my wife's "stuff". Nice little 3 bike group
Power User
Roostin Away
Repacking my first hydraulic ram. Leaking at gland at ram/ram wiper. As an aside, I thought I ordered the right parts however what I got is not what I needed. I got just the o-ring no wiper/seal. Maybe These can be ordered based on gland/rod dimensions/diameter??
Anyway, extracting w some help. I did remove the lines but it was just a little bit stuck and I couldn’t quite pull it out by hand. Popped easily
Ram back on to break nut free.
Free
Power User
Catch me if you can
You’re a man of many talents Doc. I’ve never had the nerve to open a cylinder like that.
It sucks to get old
Power User
Roostin Away
Well i know when I am beat on some things
The 79 ford with the 557ci is getting fuel injection but still keeping the twin tanks and switch, so that is in the pro-shop.
Power User
Catch me if you can
^ The DYNAHOE I had with a Detroit Diesel, had a 4" piston on the boom. I changed those seals by myself - It was crazy, blocks of wood and cables/pulleys/junk, but it worked.
Now, with my 500C JD, I use a local shop for the seals. They can get you your wiper by gland/piston dimensions etc. Of course they will rebuild the whole thing, but I never let anyone take my pain...
The hydraulic shop is in Holbrook - http://www.cylinderrebuilder.com/ hooked me up, I ruined one seal, they helped me get another FAST - Then I made a "UHMW Seal twister inserterererer installer." lol...
Older shop, nice people, cool...
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
Roostin Away
thx,
I think I will have to bring the end-piece to a shop and just have them install the wipers/o-ring, at least I did the hard part!
Power User
Catch me if you can
And I noticed you have a brand new piece of pipe for a breaker bar... Did you run to Homie D for that??
One time I couldn't get a piston out, Too big and too heavy.
So I used the hydraulics, that thing shot off like a rocket!! LMAO...
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
Roostin Away
No, just a scrap piece of pipe
Power User
Roostin Away
Rain, had a few minutes so i popped all new seals, rings, wipers into the hydraulic ram. First one, didn’t go bad. Will see how it does under pressure!
Power User
Catch me if you can
I see a remote control. Are you watching reruns of Botched while you putter away?
It sucks to get old
Power User
The day begins with 3WW
Selling crap on cl...it's very bad now ppl think they can half your prices which are good prices to start with.
Power User
Roostin Away
Naw, I think I had South Park on
Reply With Quote
