Honda 177X ATC !!!!SOLD!!!! !!!!SOLD!!!!

[Teeksoffroad]

Love the painted bent forks. Is that so the fender scrapes off the tire to keep it clean when your tearing it up around the track ?

[maggiesboy]

duro has a front tire to match the rears you have chosen. It is heavy, but will get that look.

Here is the link for the duro hf-247 they make the 19 7 8 and a 18 9.5 x 8 (my personal choice) http://www.durotire.com/products/ind...tparent=Racing

[thefox]

Thanks for the link.I have decided to stay with the stock frame.

Go for the aftermarket frame edog, that will really set it apart otherwise it will just be another little trike that someone added a few non-stock pats to. Other then that you are doing a great job on one of the trikes that get used and abused but rarely cared for.

[edog]

duro has a front tire to match the rears you have chosen. It is heavy, but will get that look.

Here is the link for the duro hf-247 they make the 19 7 8 and a 18 9.5 x 8 (my personal choice) http://www.durotire.com/products/ind...tparent=Racing

Does Douglas make a 3/100 bolt pattern rim for thos sizes?

[mymint87]

There's a Bandito on ebay right now coming outta San Diego ...if thats how you roll...ok shipping price too

[edog]

There's a Bandito on ebay right now coming outta San Diego ...if thats how you roll...ok shipping price too

Working for the cheda

[200xman]

Since when does a flat track racer need a headlight, taillight and skid plate. Ditch that junk and save some weight. Remember, less weight = more speed. Don't make me bring my stroker 110 up there and show you how it's done.

[250rfreak]

haha i knew it twas you on e2s

[SWIGIN]

Since when does a flat track racer need a headlight, taillight and skid plate. Ditch that junk and save some weight. Remember, less weight = more speed. Don't make me bring my stroker 110 up there and show you how it's done.

you know what, your right


where is the flat track bike at?

[mymint87]

There's a Bandito on ebay right now coming outta San Diego ...if thats how you roll...ok shipping price too

http://cgi.ebay.com/ebaymotors/VINTA...em300192480178

[Vealmonkey]

He could do away with the headlight and tail light if he wants, but on the stock frames, the skidplates play a vital role. Not only do they help strengther tne rear of the frame from "sideways" forces by tying the lower sides together, they also help alot of dirt and crap from being thrown up inside the frame and around the bearing helping to eliminate excess weight by general crap getting kick up in the course of a ride or "heat". Alot of older racers that used the stock frames, made reinforced or heavy duty skidplates. The stock honda frames tended to bend or crack under serious racing. That's why when they designed the 185s and 250r they went to tubular frames and later went with the square tubed frame on the 86-87 200x, stronger.

[edog]

He could do away with the headlight and tail light if he wants, but on the stock frames, the skidplates play a vital role. Not only do they help strengther tne rear of the frame from "sideways" forces by tying the lower sides together, they also help alot of dirt and crap from being thrown up inside the frame and around the bearing helping to eliminate excess weight by general crap getting kick up in the course of a ride or "heat". Alot of older racers that used the stock frames, made reinforced or heavy duty skidplates. The stock honda frames tended to bend or crack under serious racing. That's why when they designed the 185s and 250r they went to tubular frames and later went with the square tubed frame on the 86-87 200x, stronger.

I wasn't going to argue you that with them but I was thinking the same thing.

I also am going to be adding some rigidity to the frame in the next couple days.

[DeePa]

notice how the 250r is still dry?

ride the thing...

and i hope youre kidding with the 250r fenders and tank on the 90.

although, the 90 is more your speed. oh and dont forget to wear your helmet up mt washington again this year. might get hurt

[kilabeez0]

looks awesome. couple questions

i see you have a nice sand blast cabinet, are you powder coating your parts or painting?

aren't you a teenager? how old are you?

is that your house or your parents?

and aren't you in hampstead? i'm in salem, i might have to use that blast cabinet until i buy my own

[Dirtcrasher]

Paint my parts

Kid,sometimes I act like one.

Age 35

I am married 2 kids and I own my own house.

I actually wanted to ask you this awhile ago when I saw it in one of your photos..... That blast cabinet you have doesn't look like a cheapo, it appears industrial??

Thing is, it's tough to figure out what you really have or not? You post these pics of tires that I tried to hook you up with, A hot girl I wanted you to hook ME up with and to say the least - I'M CONFUSED

What media are you using and did you buy the cabinet?? I need to grab one sometime and would appreciate the feedback. Harbor freight might work but I'd drop 500$ for a good cabinet. What brand is it and are you satisfied with it?? Thanks for any help......