Page 8 of 20 FirstFirst ... 6 7 8 9 10 18 ... LastLast
Results 106 to 120 of 291

Thread: Kxt250 Tecate 3 What Parts Fit Swap Interchange?

  1. 02-10-2010, 09:35 PM #106
    nd4speed's Avatar
    nd4speed
    nd4speed is offline Power User Got the holeshot
    Join Date
    Sep 2005
    Location
    MICHIGAN
    --
    2,027
    Potential rear sprockets for 1986-87 Tecate?

    Basically all Ducati bikes have the same bolt pattern but the bolt holes are tapered and 10.5mm which is 2.25mm too big. Maybe you can get special bolts made easier? Or turn down the Ducati bolts and use a die to make your own thread??

    JT sprockets
    JTR 735

    Just a thought.

    Close enough? drill out holes?

    JTR 13
    Last edited by nd4speed; 07-30-2012 at 12:21 AM.
    86 T3
    84 T3
    86 KX250
    Reply With Quote Reply With Quote
  2. 02-11-2010, 08:49 AM #107
    OZQUAD44's Avatar
    OZQUAD44
    OZQUAD44 is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Dec 2003
    Location
    australia
    --
    838
    Gents KFX450 rear swingarms. There is a heap on ebay, has anyone measured one up to fit an 86/87 Tecate?

    The end that goes towards the engine has the same open area that Tecates have. at top mount towards the centre, like Tecates have. And they look like they may even be longer than a Tecate swingarm. I suspect that with a little bit of machine work, those swingers could easily be made to fit into a tecate.

    Say hello to round house bearing carriers, wide axles and modern hubs.
    My toys 85 KXT250A2, 85 ATC250R, 85 Tri-z 250, 06 LT-R450, 04 YFZ450S, 07 125 typhoon x 3, 06 FPV GT.
    Reply With Quote Reply With Quote
  3. 02-11-2010, 04:59 PM #108
    scottyms's Avatar
    scottyms
    scottyms is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Feb 2006
    Location
    ohio
    --
    219
    ya i played with one... sprockets didnt look to line up....
    Reply With Quote Reply With Quote
  4. 02-18-2010, 07:00 PM #109
    scottyms's Avatar
    scottyms
    scottyms is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Feb 2006
    Location
    ohio
    --
    219


    Yamaha 2HR-24500-02-00

    petcock for a yfm400 big bear

    list price is 26 bucks, discount prices about 15 bucks

    Fits good... outlet is out the bottom... i think we have a winner!!!

    scotty
    Reply With Quote Reply With Quote
  5. 02-18-2010, 07:15 PM #110
    alexandros
    alexandros is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2008
    Location
    Athens Greece
    --
    283
    Yes, we have a winner!!!

    Looks really good
    Reply With Quote Reply With Quote
  6. 02-18-2010, 08:20 PM #111
    JohnR.'s Avatar
    JohnR.
    JohnR. is offline Power User Roostin Away
    Join Date
    Dec 2002
    Location
    Orange County, NY
    --
    1,772
    NICE! I wish I hadn't spent $80 on a T3 one 10 years ago.
    1985 Eddie Sanders ATC330r
    1986 Monstecate
    1984 ATC70 (awaiting 125cc transplant)
    1984 ATC125M
    1986 GSXR 750 - Keepin' it old school!
    1999 Arctic Cat 500 4x4 plow machine
    1999 Arctic Cat Thundercat 1000 (lake lizard)
    1996 Arctic Cat Jag 440 L/C (ditch banger)
    Reply With Quote Reply With Quote
  7. 02-22-2010, 02:40 AM #112
    3 or die's Avatar
    3 or die
    3 or die is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    southeast
    --
    198
    anyone know what rear axel nuts that hold on the rear hubs will interchange for 86/87?
    Reply With Quote Reply With Quote
  8. 02-22-2010, 02:53 AM #113
    Tyler 54
    Tyler 54 is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Nov 2003
    Location
    Warsaw, IL
    --
    862
    I used 86-87 200X. The 400Ex should be the same.
    1969 Trail 70
    1973 ATC 70
    1983 ATC 70
    1986 ATC350X
    1986 ATC250R X 3
    1986 ATC200X
    1987 ATC200X
    2012 Polaris RZR
    Reply With Quote Reply With Quote
  9. 02-22-2010, 11:04 AM #114
    OZQUAD44's Avatar
    OZQUAD44
    OZQUAD44 is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Dec 2003
    Location
    australia
    --
    838
    I found the Yamaha hubs to have a little too much slop. Please check the Banshee hubs are not too loose when you first put them on, as it may wreck your splines if the hub nut loosens off any.

    The Honda splines are a closer match.
    My toys 85 KXT250A2, 85 ATC250R, 85 Tri-z 250, 06 LT-R450, 04 YFZ450S, 07 125 typhoon x 3, 06 FPV GT.
    Reply With Quote Reply With Quote
  10. 02-22-2010, 12:22 PM #115
    alexandros
    alexandros is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2008
    Location
    Athens Greece
    --
    283
    Quote Originally Posted by 3 or die View Post
    anyone know what rear axel nuts that hold on the rear hubs will interchange for 86/87?
    will the tecate 4 nuts work? they look the same
    Reply With Quote Reply With Quote
  11. 02-22-2010, 10:55 PM #116
    3 or die's Avatar
    3 or die
    3 or die is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2004
    Location
    southeast
    --
    198
    i found today that sx and es nuts work...
    Reply With Quote Reply With Quote
  12. 02-28-2010, 08:05 PM #117
    alexandros
    alexandros is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2008
    Location
    Athens Greece
    --
    283
    is a 87 kx 250 cylinder the same with the 86-87 kxt tecate?
    Parts number are different.

    i have found a brand new oem here locally.
    Reply With Quote Reply With Quote
  13. 02-28-2010, 08:14 PM #118
    JohnR.'s Avatar
    JohnR.
    JohnR. is offline Power User Roostin Away
    Join Date
    Dec 2002
    Location
    Orange County, NY
    --
    1,772
    No. The 87 KX had the smaller bore and longer stroke like the T4 had. 1986 KX was the last year for the same piston as the KXT.
    1985 Eddie Sanders ATC330r
    1986 Monstecate
    1984 ATC70 (awaiting 125cc transplant)
    1984 ATC125M
    1986 GSXR 750 - Keepin' it old school!
    1999 Arctic Cat 500 4x4 plow machine
    1999 Arctic Cat Thundercat 1000 (lake lizard)
    1996 Arctic Cat Jag 440 L/C (ditch banger)
    Reply With Quote Reply With Quote
  14. 02-28-2010, 08:23 PM #119
    alexandros
    alexandros is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2008
    Location
    Athens Greece
    --
    283
    ok thanks for the reply!
    Reply With Quote Reply With Quote
  15. 02-28-2010, 11:06 PM #120
    JohnR.'s Avatar
    JohnR.
    JohnR. is offline Power User Roostin Away
    Join Date
    Dec 2002
    Location
    Orange County, NY
    --
    1,772
    Since this thread is supposed to be more of a listing of what interchanges I'd rather not get into a discussion here. If you'd like to discuss it via PM or start a new thread I'd be happy to show you how I came up with the answer I gave him.
    1985 Eddie Sanders ATC330r
    1986 Monstecate
    1984 ATC70 (awaiting 125cc transplant)
    1984 ATC125M
    1986 GSXR 750 - Keepin' it old school!
    1999 Arctic Cat 500 4x4 plow machine
    1999 Arctic Cat Thundercat 1000 (lake lizard)
    1996 Arctic Cat Jag 440 L/C (ditch banger)
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //