I've had this 250sx for about a year now. Never any problems. Road it on the open road topped out for a good few stretches and now it's making a clunking noise when I start it up, but goes away when I give it throttle. Any ideas what it could be?
Registered User
New to the board
I've had this 250sx for about a year now. Never any problems. Road it on the open road topped out for a good few stretches and now it's making a clunking noise when I start it up, but goes away when I give it throttle. Any ideas what it could be?
At The Back Of The Pack
Arm chair racerAt the back of the pack
Valves adjusted correctly?
83 KAWASAKI KLT200C
83 HONDA BIG RED 200E
84 HONDA BIG RED 200ES x2
85 HONDA 250SX
86 HONDA 125M
HEALD HAULER TRIKE W/DUMPBOX
Registered User
New to the board
As far as I know. Yes. I've riding it a lot prior and never any problems
Registered User
New to the board
It seems like the lower left side of the motor. I'm going to pull it out tomorrow and have another look st it
Registered User
New to the board
Sounds like the connecting rod bearing to me
Registered User
New to the board
Okay so I pulled it out again yesterday and it's definitely bottom right side of the motor (kick start side). It shifts fine. The case would vibrate as i gave it throttle. But that when Iit off. The whirling sound gets louder. And it won't start with the electric start like it use to. I took a video of it yesterday. Not sure if I'm able to upload that on here
Registered User
New to the board
https://youtu.be/fqj3u9QB9II
Here's the video of it
Reply With Quote