Just put a 200x tree on my 110

**muthey** · 11-25-2012, 12:49 AM

It really does sit nice, I sat on it a couple of weeks ago and the only thing I could think of was it was alittle high in the front but I gave Randy a parts 110 so he now has a spare frame to play with for a rear suspension idea. lol

**DasUberKraut** · 11-25-2012, 01:53 AM

I hate to be the one guy that dislikes something. I gotta say though. I don't like it. To me it's too chopper-ish. Maybe too sporty-ish. I think as far as suspending the smaller trikes. I like the 185s/200s front end better.

I however did my conversion and never got to ride it before my frame cracked in half.

Let the hating begin!

**Gripit'n'ripit** · 11-25-2012, 10:37 AM

Were you doing the work in a storage unit? Did that with a car up here in NY, people running the place did NOT approve.

**dustrunner** · 11-25-2012, 10:50 AM

yep, great job.. off to the shop we all go....

**250sxman** · 11-25-2012, 11:14 AM

I've been looking to do this on my 185, was it a direct swap or did you have to do custom fab work? Maybe you could do a write up....

**DasUberKraut** · 11-25-2012, 05:20 PM

Originally Posted by Gripit'n'ripit:1173651

Were you doing the work in a storage unit? Did that with a car up here in NY, people running the place did NOT approve.

Nope. I just rolled it out of the unit for a pic.

**Ol Deuce** · 11-25-2012, 07:44 PM

Originally Posted by DasUberKraut

Nope. I just rolled it out of the unit for a pic.

I was going to do the 185s front and had all the stuff on my work bench and ya know ,I'm really
glad I went the extra mile on this change over...Its never been done ! by doing this I found all
the X's ,R's, Sx. all had one thing in common and that's the STEM base.......What a deal, & the parts
are really available cheep! To lose the chopper-ish look you can use the 1st gen R ,big tire,keep the forks back close
to the engine head. your way is a bolt in/cool with a big tire!! the way it is right now isn't short-ish Hahaha............Its all fun to build
a little project different than the run of the mill.................Ol Deuce

**Ol Deuce** · 11-25-2012, 07:55 PM

Originally Posted by muthey

It really does sit nice, I sat on it a couple of weeks ago and the only thing I could think of was it was a little high in the front but I gave Randy a parts 110 so he now has a spare frame to play with for a rear suspension idea. lol

Thanks Brandon

I did figure out how to swing the rear on all these stamped ATC's can you imagine having a sprung 110 or 125

It's only time and might have that project done.......don't forget to save me your 125m

..............Ol Deuce

**DasUberKraut** · 11-25-2012, 08:05 PM

Now that's a project I could see! Suspended but also reinforcement for the motor mount area that is prone to splitting by the seat release.

**Ol Deuce** · 11-25-2012, 11:53 PM

Originally Posted by DasUberKraut

Now that's a project I could see! Suspended but also reinforcement for the motor mount area that is prone to splitting by the seat release.

It could come to be and might solve the cracking ,I'm really happy with the front

**Ol Deuce** · 11-28-2012, 01:26 AM

We are going to do the Mud thing tomorrow

Hahaha

**Keepah Rolln** · 11-28-2012, 05:32 PM

Nice...I think im going to grab a couple 110's

**Ol Deuce** · 11-29-2012, 11:06 PM

Originally Posted by Keepah Rolln

Nice...I think im going to grab a couple 110's

They are a good change from the bigger trikes...lite & easy...LoL the really don't use any
gas to speak of.............Ol Deuce

**Ol Deuce** · 12-05-2012, 01:57 AM

I'm planning on a change ....going to try the 250sx tree with a wider wheel

**DasUberKraut** · 12-05-2012, 06:12 PM

Are you finding that bumps and obstacles are jerking the front end around from the smaller size tire?

Thread: Just put a 200x tree on my 110

Thread Tools